DIY Acrylic Nails (lightless)

After my experience with DIY gel nail kits (lightless) I decided to try and tackle DIY Acrylic nail kits (also lightless).

For those of you who don't know the difference between gel nails and acrylic nails (because it took me a long time to learn the difference!) is that acrylic is a porous material used on nails, it's extremely tough and long-lasting and gel is literally a gel put on the nail and hardened (either cured under an LED or UV or used with an activator to harden). Gel is not porous. They both have pros and cons.

I have found acrylic to be extremely hard to work with, and its a much longer process when doing it at home.

Anyway, after trying the gel nails (in my previous post) I decided to try the DIY KISS acrylic nails, also lightless. You can pick this kit up at Walmart or Shoppers Drugmart for about $12-$16 CDN.

My first few experiences were terrible with this. It's messy, and expect it to take a very long time if you want to do it right.

The kit comes with tips, orange stick, nail file, glue, acrylic powder, acrylic liquid and a brush.

First part is the same as any kit, you cut your real nails, file the tops a little bit (so nail sticks better) and you find the right nail size and glue tips to your nails. 

Like I mentioned in my last post, I definitely didn't know about all the different helpful nail tools there are (like electric nail drills, nail tip cutters, etc). So I cut the nails with regular nail cutters and once again took an hour or so to cut and file each nail into the desired shape.

Then you clean your nails off and pour the acrylic liquid into a dappen dish (or glass bowl) and you dip the brush into the liquid so it's wet, then drag the brush tip along the powder to form a ball at the end of the brush. 

You then pad the ball onto your nail to form a flat surface. This is all in the instructions. It's also extremely hard to do...if you've never shaped nails with acrylic before.

So after I did that to all of my nails I was left with very uneven surfaces of acrylic on my nails. As I  mentioned earlier this acrylic didn't need a lamp so it dried on it's own.

After all of my nails had dried I had to file the surfaces down so I didn't have any uneven ridges...this also took another hour to get it perfect. Finally after that's done you apply a topcoat to give it a smooth and shiny top.

This whole process takes a very long time if you do it the way I did...and in the end it's not worth it.

Acrylic is extremely durable, I had no problem with lifting or tips falling off or the acrylic breaking. But for some reason the tips yellowed after some time... or at least I thought it was the tips. It was actually all the acrylic. And this is very common with acrylic, especially with the at home kits.

So I wouldn't recommend a DIY lightless Acrylic kit. It also takes an EXTREMELY long time to soak them off. I used to soak my fingers in acrylic for 15-20mins (which is very hard on your skin) and then I discovered an easier way to do it...which I'll discuss in my next post :)